ROT. HAMMER 800W 220V 2.8J SDS-PLUS 4 FUNC 5500 IPM

0 customer reviews / Write a review

Availability: In stock
Brand: TORK CRAFT
SKU: TCRH0800

Delivery Only

Delivery in 3-7 days at Hammerhead Hardware, Montague Gardens, 7441

Delivery to store for Pickup (3-5 working days)
Delivery to your address (3-7 working days)

Availability: In Stock

~~R1,721.74~~

R1,549.57

Quantity

Description Specification Reviews

Product Description

TorkCraft - Rotary Hammer 800W

Rated Speed: 0-1200 RPM
Voltage: 230V

Application:

Drilling into various masonry materials using various masonry drill bits.
Chiselling various masonry materials using various chiselling points.

General

UPC / Barcode

TCRH0800

Product Type

Main

Price (excl. tax)

R1,721.74

Price (excl. tax)

R1,721.74

Tax

R0.00

Availability

In stock (297 available)

Online Only

Delivery / Pick up

Delivery Only

Delivery in 3-7 days at Hammerhead Hardware, Montague Gardens, 7441

Delivery to store for Pickup (3-5 working days)
Delivery to your address (3-7 working days)

Extra Info

Installing chisel bits and drill bits

For assembly, pull back the fastening sleeve and hold. Push and rotate the dust-free accessory into the tool holder as far as it will go. The tool will lock automatically. Check that it has locked by pulling the tool.
To remove the SDS accessory, pull back the fastening sleeve and remove the accessory.

Depth guide

Insert the required drill bit. Fit the depth stop into the hole of the auxiliary handle and set the required depth.

Rotation setting

R-BOTTOM (Forward) = To select reverse rotation, push the lever down on the top side of the handle.
L-TOP (Reverse) = to select forward rotation, release the on/off switch and push the lever up on the top side of the handle.

Fitting the auxiliary handle

Loosen the auxiliary handle by unscrewing it. Slide the auxiliary handle clamp over the collar behind the bit holder. Rotate the side handle to the desired position and tighten the handle.

Health and Safety

WARNING: Never lay the drill down before the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power
tool out of your control or potentially damage the tool and work surface.
Regularly clean the hammer drill air vents, by using an air duster.

Length

0.0

Width

0.0

Height

0.0

Weight

0.0

Number of reviews

This product does not have any reviews yet - be the first to write one.